TMPro Module 112

Software module 112

Fiat, Lancia, PSA BSI Marelli type 3

Memory device is serial eeprom 95c160 SSOP8 package.

Expected file size is 2048 bytes.

Use PCF7936 or Silca T14 – JMA TP12 transponder or remote key.

***IMPORTANT NOTE: when you want to program remote key type2:open key and you will find 2 SMD chips – PCF7946 (SMD 14 pins) and smaller SMD chip,which can be with 8,10,or 16 pins.If this chip is with 10 or 16 pins,PROGRAM KEY AS TYPE 1.
If this chip is with 8 pins,PROGRAM KEY AS TYPE 2.

To activate remote:press any button few times,start engine,stop it and remote will work.

***IMPORTANT NOTE: if buttons of remote operate,but not work properly,for ex. button for locking opens trunk,this is NOT A TMPro2 SOFTWARE PROBLEM or problem with PCF7946.Problem is that your remote is not suitable for your vehicle.
You must use other remote.

Module also shows PIN code

Written transponder is ready programmed to start the vehicle.

Vehicles equipped with this unit:
Fiat: Bravo(2007-), Ducato(2006-), Stilo(2007-), Punto(2007-),Idea(2008-)
Citroen: Jumper(2006-), Relay(2006-)
Peugeot: Boxer(2006-)
Lancia: Ypsilon(2007-), Musa(2007-)